New Rising Technology ofgreen laser pointer
Make sure the battery is sufficient? Positive and negative battery is installed correctly? For the first time the receiver into your computer USB port using the normal steps are: the receiver is fully inserted into the computer USB port, the computer will find new hardware the lower right corner, and then automatically install the driver. Future re-insert the same PC will not install the driver does not appear that the new hardware prompt. If you do not remote, either the beginning no driver installed, or is in the back of the computer use in poor contact with the receiver or other reasons. Now all kinds of possible problems are detailed below. The technology is the newly rising technology of green laser pointer.
Operating system problems resulted in the receiver is correctly installed drivers: Make sure the computer operating system is WINXP or 2000 or more, some need the WIN98 WIN98 installation disk to install the correct driver; In addition, some computers have been installed is a simplified version of the system (ie 2000 is not installed or properly configured WINXP driver package), some WINXP or 2000 operating systems as long there is no order, system instability, or the virus itself, can lead to not install the driver. In addition, the automatic installation process some drivers will stop anti-virus software installed and prompted the need to manually confirm the installation to continue down. Solution: reinstall the system, for the computer, complete anti-virus. If the antivirus software prompted, confirm the installation. The new rising technology ofgreen laser pointeris very advanced.
Receiver into a computer USB port is bad, right into the receiver after the green light above the first light for a few seconds and then off, if the green light stays bright light or performance are bad. Generally bad for three reasons: First, if the computer (especially the desktop) USB port long-term need, it is easy because Nianman dust or other reasons leading to poor contact, the second, some computers have several USB interface Some can and some can not be used, and the third, the location of the computer USB interface is narrow, the receiver can not be fully inserted into the computer. Therefore, in order to ensure that the receiver is properly inserted, please make sure your computer's USB port can be used, the easiest way to judge is that you can acquire a work of the U disk into to try to see U disk can not be used? If U disk USB interface can be used to illustrate this is no problem, so if you can not use U disk pen page here certainly can not use. The advanced technology ofgreen laser pointeris at world’s level.
Solution: change the USB interface or change the computer. Confirm the USB interface in the normal case (with a USB port, insert U disk can be used, but flip the pen into the receiver can not be used), the receiver may not be fully plugged into the USB interface, a result can not remote control. Solution: Use the included USB cable connected the receiver and computer. Find the driver, perhaps because the computer system file is not complete: please try to change computers or reinstall the system. If the reasons are ruled out of 1,2,3, there may be multiple sets of flip between the pen and put the wrong password is not on the result. Each of our products page pen factory pen body and the receiver to go through the process of code, which means that each has a unique password, if set and set between the receiver and use cross-page pen , we can not recognize the password, of course, can not use remote control. The technology ofgreen laser pointershould be kept confidential.
Solution: Turn your protect your pen, do not flip pen with colleagues installed a wrong; if wrong, please be wrong sets of pen switching the receiver one by one and then test. Strong electromagnetic interference environment, can lead to temporary remote control not working. Solution: Please use USB cable to connect the receiver to the computer, increase the distance the receiver and the host computer, host computer in order to reduce the impact of electromagnetic wave to the receiver. Others such as audio, amplifiers, amplifier, projector and so will the receiver electrical equipment produces electromagnetic interference, please try to stay away from these machines, or equipment temporarily closed until the electromagnetic interference can be restored to normal after the cessation of work. The confidential technology ofgreen laser pointercannot be revealed.
related cell phone jammer blog
portable cell phone jammer 
3g cell phone jammer
phone jammer